Toilet Plumbing Installation: Avoid These Common Mistakes

Most people think that installing a toilet is an easy task! That is not true at all. If you make a minor error, it can result in costly repairs in the long run. It's because the toilet, from the start, will have improper functionality and leaks, which is never a good thing to have.

It is always better to consult a professional plumber for the installation work. But even when you are getting the work done by an expert, you need to know about a few mistakes that are essential to avoid. In this article, we will discuss some of the common errors people make in toilet plumbing installations.

• Improper measurement and placement

A crucial mistake to make is not to measure the place correctly. The toilets need a specific “rough-in” distance for installation. It is the place from the wall right in the middle of the toilet’s overhang. In case this measurement is wrong, there will be a problem with the toilet fitting. There might be strange gaps as well that will be tough to manage. Therefore, make it a point to check the measurements and get it right.

• Bolts that are too tight

Several DIY installers over-tighten the bolts that secure the toilet to its floor. Everyone indeed wants a snug fit. But in order to achieve that, if you use excess force, it can crack the base of the toilet and even strip the bolts. This, in turn, leads to instability. Therefore, you need to tighten the bolts gradually, which can help you avert all kinds of damage. This is where you must consult a professional installation toilette plomberie provider who can guide you about this and other procedures correctly.

• Overlooking floor levelling

Make sure that you don’t install a toilet on an uneven floor. If you do, there will be leaks and cracks in the porcelain as time passes by. It can also result in rocking. Hence, before you start the installation, ensure that the floor has been levelled correctly. In case it is not, you have to opt for floor levelling compound or shims to get the issue corrected.

• Placing the wax ring incorrectly

The wax ring can help in creating a watertight seal that is placed between the drain pipe and toilet. In case it is reused and not well-positioned, it can lead to a pungent smell and leaks. Therefore, it's better that you make use of a brand-new wax ring installation. That way, you can ensure that it is in correct alignment with the flange.

• Overlooking the water supply connection

Is your water supply line poorly or loosely connected? If yes, then it can lead to slow leaks, which wouldn’t be visible initially. You will only get to know about it when there is water damage. Therefore, make it a point to inspect your water supply line and the substitute it if there is a need for it. Make sure that the connections are not excessively tight so that the fittings don’t get damaged. To know more about this, you can check out https://www.plomberie5etoiles.com/ so that you can decide better. Speaking to a professional plumber always helps in better decision-making.

Therefore, toilet plumbing installation comes with a set of checks that ensure the process is implemented correctly. At times, people make installation mistakes that can prove costly later. Errors like over-tightened bolts or forgetting to check for leaks can prove to be fatal later. You can't be aware of these mistakes. Hence, getting in touch with a professional plumber helps.

Summing it up

Your toilet is an important space in your house, and the right plumbing installation is crucial. If you make any of the above-mentioned mistakes, then there will be poor performance. In order to avoid this, you will need careful planning, proper measurements, and getting the detailing correct. This, in turn, will ensure that you don’t incur any expensive repairs later.